Loading ...KKE 200 : Automatic High Pressure Car Wash Equipment
Equipment Overview
KKE 200 is equipped with latest features which will help you make your car wash facility the most popular one in your area.
The equipment uses High Pressure Technology to remove the dirt adhered to the car surface. KKE is researching and developing for constantly to develop better ways of cleaning by effective utilization of resources.
The oscillating nozzles provides an appealing look to the equipment.
KKE 200, controlled by PLC provides very reliable and robust control system giving you uninterrupted services and maximizing your bottom line. It also comes with Fault Text display panel.
Features
The KKE 200 series car wash equipment is fully automatic. The KKE 200 series equipment are roll over gantry type system, where the vehicle is driven in position and remains stationary and the gantry moves over the vehicle and executes all operations. The equipment uses latest high pressure technology which has no limitation about the shape of the vehicle.system cycles
- Under Chassis Wash (Automatic Vehicle detection ) *
- Pre wash
- Foam Soap Spray
- Wheel Wash with rotating brushes
- Silicon Wax Spray *
- Triple Shine Foam Wax Spray *
- Drying Agent Spray *
- Contour Following Drying *
- Exit Side Drying *
* optional equipment cycles
system features
- PLC Controlled
- Automatic / Manual operation
- Structure painted with Anti-corrosion paint for long life
- Text display to diagnose the fault with the equipment
- Easy to use and maintain
- Anti-tilt mechanism on the trolley
- Quick Installation
- Easy integration with any Credit Card, Cash Payment Module
Trolley
| The trolley runs on the rails fixed on the ground. The trolley is fitted with anti tilt mechanism. The trolley is covered with Aluminum Composite Panels making the equipment very attractive. |
Pre Wash Arch
| This is special spray arch, equipped with low discharge nozzles. The Pre Wash Arch sprays water initially over the vehicle to soak the hard mud stains, salt deposits, bird droppings, etc. |
Foam Soap Spray
 |
Soap is sprayed in form of foam so that it stays on the car for more time and attracts your customers. |
High Pressure Washing Arch
 |
3 banks of nozzles clean the car surface. The side vertical banks (2) oscillate to maximize the area of impact and helps to attract new customers. The horizontal water bank changes its direction of impingement according to the car surface. |
Contour Following Nozzles
 |
The horizontal bank of nozzles, follows the contour of the car. The horizontal bank always maintains safe distance from the car surface. The water jets adjust their angle to face the car surface. All the pipes on the equipment are made of Stainless Steel grade 304. |
Wheel Wash System
| The equipment senses the wheels of the car. The trolley stops and wheel wash brushes come out to clean the wheel rims. (Stroke 350 mm). |
Wheel Guides
| Wheel guides help to position the cars to be washed at correct place at the wash bay, hence ensuring safety of the equipment as well as the car. |
Operators Panel
 |
Operators Panel is easy to use and understand, user interface panel. You can select desired wash program through selector switch on operator panel. You get information about working cycle, while the equipment is washing the car by using different programs, selected by the operator. The operator’s panel is easy to use and understand for any person. |
Computerized Control System and Intelli Wash Programs
 |
The equipment is controlled by Programmable Logic Controller. The control system is outside the equipment trolley for better control. An additional Text Display unit is provided to display fault codes if any occur during the equipment working for easy diagnostics. |
Optionals
Silicone Wax System
Silicone wax spray system with special mist developing nozzles.
Ordering Code : KKE100975
Triple Foam Wax System
Tri-colour foam is sprayed on the car and then the foam is washed by a final rinse.
Ordering Code : KKE100977
Contour Following Drying System
Drying System consists of 4 high volume blowers, which follow the contour of the vehicle. The contour of the vehicle is optically sensed and the blower follows the contour of the vehicle. There are four blowers, two drying the sides and two for drying the top. The top blowers always maintain a safe distance from the car. The blowers are mounted on the moving gantry itself and you don’t need to build another station for drying operation.
Ordering Code : KKE100980
Standalone Drying System
An arch is installed at some distance from the wash bay. As the car moves through it, the blowers start automatically and remain ON for 60 secs (depends on local conditions) or till the car is moving through it. There are four blowers , two on the top and one on each side.
Ordering Code : KKE100976
Swiveling Under Chassis Wash System (In Bay)
The Swiveling Under Chassis Wash System uses electro - pneumatic swiveling mechanism which continuously moves the nozzles. The swiveling results in, increase in the covered area and thus cleaning those hard to reach places. The under chassis wash system covers the complete length of the car. The Under Chassis wash takes place while the soap is sprayed on the vehicle and uses the same high pump, that is used by high pressure rinsing.
Ordering Code : KKE100984
Fixed Under Chassis Wash System (In Bay):
Fixed under chassis wash system contains a network of Nozzles which spray high pressure water and remove dirt. The under chassis wash system covers the complete length of the car. The crisscross network of nozzles increases the cleaning area.
Ordering Code : KKE100981
Swiveling Under Chassis Wash System (Entry Point)
This Swiveling Under Chassis Wash System is located at the entry point of the car wash bay. The under chassis wash system automatically senses the car and switches on the Water pump. This Automatic activation feature can switched off from the Operator’s Panel. Swiveling Under Chassis Wash System uses electro - pneumatic swiveling mechanism which continuously moves the nozzles. The swiveling results in, increase in the covered area and thus cleaning those hard to reach places.
Ordering Code : KKE100983
Backlit Wash Cycle Display
Back lit display , displays the wash cycle which is in progress. The display is controlled by the PLC computer in the Central Control Panel. The display can be mounted any where near the equipment, so that the person washing his car can see the cycle which is in progress. The display is multi colored with logos and text representing the wash cycle. It also gives Red and Green signal, telling the customer, when to the enter the bay
Ordering Code : KKE100974
Additional Spares kit for 3 years
In KKE 200 car wash system, there are many moving parts. This spares kit consists of most of the items which get worn off and may be needed to be replaced for providing uninterrupted service to your customers. It is always good to have spares rather than ordering them when they are actually required. With the spares kit, you’ll will able to avoid the downtime as you may replace the parts immediately.
Ordering Code : KKE100982
Technicals
Washbay Dimensions
| Preferred | Minimum | |
| Length | 10 m |
9 m |
| Width | 4.5 m |
4 m |
| Height | 3.5 m |
3.2 m |
Washable Dimensions
| Length | 5.7 m |
| Width | 2.2 m |
| Height | 2.2 m |
Electrical Power
Option : 3 Phase 440 V A.C. 50 Hz.
Option : 3 Phase 380 V A.C. 50 Hz.
Option : 3 Phase 240 V A.C. 60 Hz.
Gallery
Comment
No comment added.
To add a comment fill the form below.
Wed, 14 May 2008 1:15:03,